Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Rollingwood, TX | Boardwalk Chimney Sweep
We provide independent HeatShield chimney cleaning and restoration service across Rollingwood, TX, and also offer our Chimney Sweep in Rollingwood. The thing that makes our HeatShield work here different comes down to one unglamorous fact: live oaks shade nearly every chimney in this city, and shaded masonry stays damp. That single condition changes how HeatShield products bond, cure, and hold up, which is why Rollingwood jobs need a different approach than what works ten minutes east in full sun. Call (877) 274-1247 for a free estimate.
We’re HeatShield sales & service specialists, not a sweeping crew that dabbles in liner work. Our techs know the Cerfractory Flue Sealant system, the resurfacing mortars, the joint compounds, and the crown coatings well enough to tell you when a repair will last and when it won’t. If you’re in Rollingwood service area and your fireplace has a HeatShield liner or firebox that’s showing age, we can assess it honestly.
Why Rollingwood Residents Choose Us for HeatShield Service
Most of the homes in Rollingwood were built between the 1950s and 1970s, and a lot of them still have their original masonry fireplaces. Those are exactly the chimneys HeatShield products were designed for, and they’re the ones we know best. When a homeowner here calls about a smoky fireplace or cracked flue tile, they’re usually not asking for a basic sweep. They’re asking whether a fifty-year-old clay liner can be saved without tearing out the whole chimney.
Brent Holloway, our owner, learned the trade through ACC’s Riverside Campus HVAC and building systems program, then spent years working every flue style you find in the Hill Country: clay tile, stainless steel inserts, the old double-wall metal systems from the eighties. He’s the guy neighbors call when they want a straight answer about whether a HeatShield resurfacing job was done right or whether a prefab firebox can handle another season. We use genuine HeatShield materials on every liner, resurfacing, and crown repair because that’s what the product needs to perform as engineered. Quality aftermarket caps, dampers, and screens fill in where OEM parts wouldn’t change the outcome.
Styles & brands we work with
Common HeatShield Chimney Cleaning Problems We Solve in Rollingwood
- Cast HeatShield liners on undersized flues. Rollingwood homes get renovated and expanded constantly, and that often means a fireplace gets a new insert or a different appliance without re-evaluating the flue. A HeatShield liner cast over a flue that was never sized for the current appliance produces weak draft and smoky fireplaces. We measure and diagnose before recommending any fix.
- Delaminated firebox resurfacing due to damp masonry. The original 1950s-to-70s brick in Rollingwood fireboxes stays damp longer than homeowners realize because the live-oak canopy blocks sun. If HeatShield firebox mortar was applied over brick that wasn’t fully dried, it delaminates at the bond line. We see this regularly, and the fix requires removing the failed layer, drying the masonry properly, and re-applying.
- Creosote buildup behind failed joint compound. Hard Central Texas freezes crack clay tile flue joints, and when HeatShield joint compound delaminates in those cracks, creosote seeps behind the liner. That’s a hidden fire risk. Our sweeps inspect joint-by-joint, not just the visible surface.
- Spalling brick under failed crown coating. Exterior chimneys in Rollingwood get baked by Texas sun between episodic winter burns. HeatShield crown coating that breaks down exposes the brick underneath to moisture, and spalling follows. We repair crowns before they become structural problems.
- Cap and spark screen rust from oak debris. Live oaks drop leaves and twigs onto chimney caps nearly year-round here. The debris traps moisture against metal caps and screens, and the shaded position slows drying. Rusted caps admit water, which compromises any HeatShield work below. We replace them with quality aftermarket parts when needed.
HeatShield Service in Rollingwood: What Local Conditions Mean for Your Equipment
Rollingwood sits under one of the densest live-oak canopies in the Austin metro, and that shade changes how Austin HeatShield service providers have to schedule work. Exterior chimneys here stay slow to dry after rain, sometimes for days. HeatShield resurfacing mortar and crown coating need a properly dried substrate to bond, especially on the 1950s-to-70s masonry that dominates the housing stock. A crew that works year-round in sun-exposed suburbs can schedule a crown repair the day after a storm and get a clean bond. In Rollingwood, we check moisture readings and wait for a dry window, because applying HeatShield to damp brick is how you create a callback in six months. The canopy also means we sweep more oak leaves, twigs, and granulated creosote out of caps and flues than typical suburban sweeps, and it means caps rust faster here than almost anywhere else in the area. If you can smell the smoke inside, the chimney’s already telling you something, worth listening before it gets louder.
HeatShield Models & Products We Service in Rollingwood
We work with the full HeatShield product line: Cerfractory Flue Sealant for cast-in-place liner restoration, HeatShield Resurfacing Mortar for firebox and smoke chamber repair, HeatShield Joint Repair compound for cracked clay tile joints, and HeatShield Crown Repair and Crown Coating products for exterior chimneys. On the parts side, we use genuine HeatShield materials for any liner, resurfacing, or crown work because that’s what makes the repair hold. Where OEM equivalents add no benefit, caps, dampers, and screens, we use quality aftermarket parts that meet or exceed the original spec. We keep the most-used HeatShield materials on hand so most Rollingwood repairs don’t wait on a shipment.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Rollingwood
HeatShield work in Rollingwood typically falls into three tiers. A basic chimney sweep with creosote removal runs $229 to $329 depending on flue condition and accessibility. A level 2 inspection, which includes camera work and is what we recommend before any HeatShield application, runs $249 to $399. HeatShield resurfacing and crown repair work is quoted per job because the scope depends entirely on what the camera shows: a simple joint compound repair might run a few hundred dollars, while a full Cerfractory cast could be several thousand. What drives cost in Rollingwood specifically is access: steep rooflines, oak limbs over chimneys, and older masonry that needs extra prep work. Every estimate is free, and you’ll see the camera footage yourself before you approve anything. Call (877) 274-1247 to schedule a sweep and inspection, and we’ll give you a straight number.
Serving Rollingwood, TX — Our Local Coverage Area
We’re based in the Rollingwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Rollingwood
No. We are an independent HeatShield service provider. We use genuine HeatShield materials and have years of hands-on experience with the product line in Rollingwood, but we’re not authorized, sponsored, or endorsed by HeatShield. If you need warranty work from the manufacturer, we’ll tell you plainly and help you navigate it.
Yes, always. HeatShield products need a clean, sound substrate to bond properly. We remove glazed and stage-three creosote down to bare clay or masonry before any liner, resurfacing, or joint compound goes on. Skipping that step is how failed HeatShield applications happen. Call (877) 274-1247 and we’ll show you the before-and-after during the inspection.
A standard sweep and inspection takes one to two hours. HeatShield resurfacing or crown work usually takes a full day, sometimes longer if moisture readings show the masonry needs extra drying time. Rollingwood’s oak shade means we sometimes have to schedule work around a dry window, which can add a day or two compared to sun-exposed neighborhoods.
All of them: Cerfractory Flue Sealant, Resurfacing Mortar, Joint Repair compound, and Crown Repair and Coating products. If it’s HeatShield and it’s in a chimney, we’ve worked with it. We also inspect and assess existing HeatShield work, whether we installed it or not.
Most Rollingwood chimney sweeps with HeatShield-adjacent inspection run $229 to $399 depending on scope. A full HeatShield resurfacing or crown repair is quoted per job and typically starts around a few hundred dollars for small joint repairs. The best way to get an exact number is a free on-site estimate. Call (877) 274-1247.
Service Areas Near Rollingwood
We serve Rollingwood and the surrounding Hill Country communities. If you’re in HeatShield service in Lost Creek, Barton Creek, West Lake Hills, or Bee Cave, we cover those areas too. Up north, HeatShield service in Liberty Hill is also in our service range. Our techs know the chimneys in this part of Texas well enough to spot the difference between a Rollingwood original and a Lakeway rebuild before they get out of the truck.
Book Your HeatShield Service in Rollingwood Today
Call (877) 274-1247 to schedule a free estimate. We’ll inspect your chimney, show you the camera footage, and give you a straight answer about what your HeatShield system needs, whether that’s a sweep, a joint repair, or something more. Rollingwood homeowners have trusted us with their fireplaces for years, and we’d be glad to take a look at yours.
Written by Brent Holloway, Owner at Boardwalk Chimney Sweep, serving Rollingwood and the greater Austin area.