Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Rollingwood
Dryer vent cleaning in Rollingwood typically costs $149 – $289 and is usually completed within an hour to ninety minutes, depending on vent length and how long it’s been since the last cleaning. Rollingwood’s 1950s – 1970s ranch and split-level homes often have longer, more convoluted dryer vent runs than newer builds, which means more surface area for lint to accumulate. Our crew knows these houses well, from the wooded lots off Rollingwood Drive to the shaded streets around Wallis Drive. Call (877) 274-1247 to book a sweep.
We’re Boardwalk Chimney Sweep, and we’ve worked on enough Rollingwood homes to know that what looks like a simple dryer vent job often isn’t. The dense live-oak canopy, the older masonry fireplaces, and the mid-century floor plans all shape how we approach the work. One call gets you a real diagnosis, not a rushed brush-through.
Why Boardwalk Chimney Sweep Is Rollingwood’s Preferred Dryer Vent Cleaning Company
Rollingwood homeowners tend to do their homework before hiring anyone. They want to know the person showing up understands what they’re looking at, because these houses aren’t interchangeable. We get that. Our dryer vent and chimney work in Rollingwood has taken us into dozens of original ranch homes, the kind with exterior chimneys that have weathered six decades of Texas sun and the occasional hard freeze. The service we’d do on a new build in Austin isn’t the same service we’d do on a 1962 split-level on Ridgewood Road.
What matters most to Rollingwood residents is that we repair what we inspect. If we find a clogged transition, a rusted cap, or a vent path that’s pushing air into the wrong place, we don’t just note it and leave. We name the part, show you what’s happening, and fix it with materials we’d put in our own homes. The same brands chimney professionals specify, like Gelco and Olympia Chimney, are what we carry on the truck. That matters when you’re dealing with an original flue that’s been patched and expanded over the years.
Rollingwood’s tight-knit character means a lot of our work here comes from referrals. A neighbor on Ledgeway Drive tells a neighbor on Inwood Road that someone actually took the time to clean the transition duct, not just the visible pipe. That’s the reputation we’ve built. We don’t rush Rollingwood jobs, and we don’t subcontract them out to a different crew. The people who show up are the same people you’ll see again at your next annual cleaning.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Rollingwood
Every Rollingwood home is a little different, so we shape the service to the house rather than running the same checklist everywhere. Here’s what that looks like in practice.
Dryer Vent Cleaning
The core job is removing lint from the entire vent run, from the dryer transition behind the appliance all the way to the exterior termination. In Rollingwood homes, that run often passes through a crawlspace, an attic, or a wall cavity that hasn’t been touched since the house was built. We use a Gelco brush set sized to the duct diameter, he smooth-wall metal duct the way the manufacturer specifies. If your dryer vent exits through the roof rather than a wall, that’s a different animal entirely, and we treat it accordingly, because a roof termination collecting live-oak debris is a recipe for a smoldering lint plug.
Chimney Cap Inspection and Replacement
The chimney cap and the dryer vent cap do different jobs, but in Rollingwood they fail in the same way: leaves, twigs, and acorns from overhanging oaks pile up, trap moisture, and rust the cap shut over time. When that happens, the vent can’t exhaust properly, and the lint has nowhere to go but back toward the house. We inspect the cap on every dryer vent job, and if it’s rusted through, warped, or packed with debris, we replace it with a cap sized for the specific flue or vent opening. Not a universal fit. The right fit.
Level 2 Inspection of Shared Flue Configurations
This is where Rollingwood’s older housing stock makes things complicated in ways most vent cleaning companies miss. Many original ranch homes here were expanded over the decades, and some of those expansions created mixed flue configurations. A dryer vent can terminate into a stack that also serves another appliance, and in attached or closely spaced properties, that stack might carry exhaust from more than one household. A Level 2 inspection uses camera equipment to trace the actual path of the flue and confirm each appliance vents independently and correctly. If your Rollingwood home has an addition, a converted garage, or a fireplace you rarely use but that smells odd when the dryer runs, this is the inspection that answers whether your vent is functioning as a dedicated path or a shared liability.
Dryer Vent Cleaning Bundled With Chimney Sweeping
Most Rollingwood homes have both a dryer and a fireplace, and both need annual attention. The dryer vent accumulates lint. The chimney accumulates creosote. The NFPA identifies both as leading household fire risks, and nobody wants to schedule two separate service calls when one visit can handle both. We bundle chimney sweeping with dryer vent cleaning under one call. One appointment, two fire hazards addressed, and a single trip to Rollingwood instead of two afternoons taken off work.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rollingwood
For Rollingwood homes with existing dryer vent or chimney components, we work with the materials and systems already in place rather than pushing an unnecessary upgrade. That means we’re familiar with Gelco brush sets and their specific rod and head compatibility, Olympia Chimney caps and terminations, and Famco venting components. If a vent section needs replacing, we match the existing duct diameter and material rather than rigging a mismatched connector. And we stock the common sizes and parts in the truck, which means a Rollingwood job doesn’t stall out waiting on a part that has to ship from a warehouse. If it’s on the truck, it gets fixed that day. If it’s not, we tell you before we start, not after.
Brent Holloway leads our crew, and his rule is simple: if we wouldn’t put it in our own Rollingwood house, we don’t put it in yours. That’s why the parts we carry are the same brands the industry specifies, not whatever is cheapest at the supply counter. It costs us a little more per job, and that’s a trade-off we’ll make every time. The parts last, and the work holds up.
Common Dryer Vent Cleaning Problems We See in Rollingwood Homes
- Dryer vents exhausting into a shared stack. In attached Rollingwood properties or homes that were expanded over the years, it’s not unusual to find a dryer vent piped into a masonry stack that also serves a neighbor’s appliance. When that happens, lint and moisture can push back through the damper into the firebox instead of venting outside, and you’ll smell it before you see it.
- Live-oak leaves packing the cap and spark screen. Rollingwood’s tree canopy is beautiful, but it’s also the reason vent caps here fail faster than they do in open subdivisions. Leaves pile on, rain soaks in, and the cap rusts shut, killing the draft and trapping the lint inside the run.
- Original 1950s – 70s flues with spalling mortar. Decades of episodic fireplace use leave uneven creosote deposits and crumbling mortar joints in the original flue. A quick sweep that only addresses the first few feet of the chimney misses the vent path entirely, and the firebox keeps pulling air the wrong way.
- Long, convoluted vent runs through attics and crawlspaces. Mid-century ranch floor plans often put the laundry room on an exterior wall far from the roof, which means the vent pipe has to travel a long, twisting path to reach the outside. Every extra foot and every elbow is another spot for lint to collect, and these runs need cleaning far more often than a short direct vent.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Rollingwood, TX
A standard dryer vent cleaning in Rollingwood runs $149 – $219 for a single-story home with a direct vent run. Add a second story, a roof termination, or a vent run longer than fifteen feet, and the price moves to $219 – $289 because the job takes longer and the access is harder. If we find the vent tied into a shared flue, or the cap is rusted through, the cap replacement or the Level 2 inspection is quoted separately before any work starts, not sprung on you at the end. We don’t charge travel fees for Rollingwood calls, and every quote is a flat price agreed on before we touch the vent. Call (877) 274-1247 and we’ll give you a number over the phone, then stick to it on site.
We Also Serve Cities Near Rollingwood
Rollingwood sits inside the West Austin corridor, surrounded by Dryer Vent Cleaning in Rollingwood, and neighbors who share the same older housing stock and live-oak canopy. We work regularly in Austin, Lost Creek, West Lake Hills, and Barton Creek as part of our broader Dryer Vent Cleaning service area. If you’re in one of those nearby communities and need vent work, the same crew covers the area.
Serving Rollingwood, TX — Our Local Coverage Area
We’re based in the Rollingwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Rollingwood
No. Current mechanical codes require each appliance to have its own dedicated vent path, and a dryer vent sharing a flue with another dryer or a fireplace is a code violation that creates real fire and carbon monoxide risk. Older Rollingwood homes, especially those expanded in the 1960s and 1970s, sometimes have these shared configurations from before the code was updated. If we find one, we’ll show you the camera footage, explain the fix, and quote a dedicated vent path. Call (877) 274-1247 for an inspection if your dryer smells smoky or your neighbor’s appliance seems to vent into your space.
Because the canopy continuously drops leaves, twigs, and acorns onto roof terminations and wall caps, and the shade it provides keeps those exterior caps from drying out after rain. A rusted or packed cap restricts the airflow, and a restricted airflow makes lint fall out of suspension and stick to the duct walls. The denser your oak coverage, the faster the buildup. Homes on heavily shaded streets like Ledgeway Road or Inwood Road often need a cap clearing every six months even if the vent itself is cleaned annually.
A Level 2 inspection covers it. That’s the camera-based look at the entire flue path, and it’s what you want when a dryer vent terminates into a stack that may serve another appliance or another unit. A basic visual check or a quick sweep won’t show you what’s happening inside a shared flue. If your Rollingwood home has an addition, a converted garage, or a chimney that smells odd when the dryer runs, ask for the camera.
It can, when you bundle the two services. We inspect the dryer vent and the chimney cap on every dryer vent job, but a full chimney inspection, sweeping, or liner check is a separate scope of work. Rollingwood homeowners who use a fireplace even seasonally should have the chimney swept and inspected annually, and bundling it with the dryer vent cleaning means one trip, one crew, and one call at (877) 274-1247.
That smoky smell usually means the dryer exhaust is finding its way back through the firebox damper rather than exiting through the vent cap, and that’s most common in Rollingwood homes where a dryer vent shares a masonry stack with a fireplace. It’s a real problem, not just an annoyance. The lint-laden, moist air is being pushed into a space that wasn’t designed for it, and over time that moisture damages the damper and the smoke chamber. Don’t run the dryer until it’s inspected. Call (877) 274-1247 and we’ll trace the vent path and tell you exactly what’s happening.
Key Takeaways for Rollingwood Homeowners
- Dryer vent cleaning in Rollingwood runs $149 – $289, with the higher end covering long runs, roof terminations, and hard access.
- Homes with overhanging live oaks often need cap clearing more than once a year because the oak litter clogs caps and traps moisture.
- If your Rollingwood home was expanded or converted, your dryer vent may terminate into a shared flue, which is a code violation and a fire risk.
- One call covers dryer vent cleaning and chimney sweeping, addressing the two leading household fire risks in a single visit.
- Every job includes a camera look at the vent path when something seems off, so you’re not being told to trust a guess.
On a wooded lot off Laurel Lane in Rollingwood, our tech found a dryer vent tied into a shared masonry stack whose chimney cap had rusted shut under live-oak leaf litter, forcing lint-laden exhaust back toward the adjacent firebox damper. We pulled the clogged transition, cleaned the run with the Gelco brush set, and replaced the failing cap so each appliance vented cleanly. The homeowner’s lint smell and weak draft both cleared on the first cycle. That’s the kind of job we do in Rollingwood, and it’s why we look past the obvious on every call.
If your dryer is taking longer to dry, the vent cap is buried in leaves, or you smell smoke when the appliance runs, call (877) 274-1247 for a free estimate. We’ll talk through what you’re seeing, quote a flat price, and get to Rollingwood at a time that works for you.
Written by Brent Holloway, Owner at Boardwalk Chimney Sweep, serving Rollingwood and the surrounding Austin area.