Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Dryer Vent Cleaning for Round Rock Homeowners
Dryer Vent Cleaning in Round Rock typically costs $110 to $225 for a standard single-story home, and a thorough cleaning usually takes 45 to 90 minutes. The real reason homes in this area need regular service isn’t lint that you can see. It’s the layer of fine, flammable material that builds up behind the dryer, inside the vent pipe, and at the exterior termination point where the flap opens and closes. That buildup is what the National Fire Protection Association identifies as the leading cause of the roughly 15,000 dryer fires reported in the U.S. each year.
Brent Holloway leads our crew, and the reason we take dryer vent work as seriously as chimney work is simple: both systems move hot air and combustion byproducts out of your home, and both become hazards when nobody checks the hidden parts. We serve Round Rock, Brushy Creek, Windemere, and the surrounding Williamson County communities, including Dryer Vent Cleaning – Hutto. If you’ve never had your dryer vent cleaned or you can’t remember the last time, it’s overdue. Call (877) 274-1247 and we’ll get you on the schedule.
What Our Dryer Vent Cleaning Service Includes
Every dryer vent cleaning we do covers the full run from the dryer connection to the exterior vent hood. We don’t just vacuum out what’s within arm’s reach of the dryer. Lint accumulates in the entire pipe, and in Round Rock’s single-story homes with short runs that’s manageable, but in two-story homes where the vent travels up through walls or across attic spaces, the material compacts in the middle of the run. That’s exactly where a fire starts if the pipe ever gets hot enough.
Full Vent Line Inspection
Before any cleaning begins, we do a camera inspection of the vent line. This lets us see blockages, disconnected pipe sections, and damage that would be invisible from the outside. If we find a gap where the pipe has separated behind a wall, cleaning around it isn’t enough. We’ll show you the footage and explain what needs to happen next. We repair what we inspect.
Interior Vent Pipe Cleaning
We run a rotary brush system through the full length of the vent pipe, from the dryer connection to the exterior hood. The brush is sized to the pipe diameter, typically 4 inches in residential runs, and it scrubs lint off the walls rather than just loosening the loose stuff. In Round Rock’s hard water climate, lint can adhere to pipe walls where humidity has made it cling, and a basic vacuum pass won’t pull that off. The brush does.
Dryer Lint Trap and Housing Service
The lint trap catches maybe 25 percent of what the dryer produces. The rest moves into the vent. When we’re on site, we’ll pull the lint trap, clean its full surface, and check the housing where the trap sits. We remove lint that has packed down around the bottom of that housing, which is a spot nearly every homeowner misses because it’s not visible when the trap is in place.
Exterior Vent Hood Cleaning
The flap at the outside of your house, where the vent terminates, is prone to lint packing and, in Round Rock, to nesting material from birds and small rodents. We clean the hood assembly, verify the flap opens and closes properly, and make sure it seats tight when the dryer isn’t running. A flap that stays partly open all year lets rain and humidity into the pipe, which turns lint into a damp, compacted mass that narrows the opening.
Airflow Verification
After cleaning, we test the system’s airflow by running the dryer and checking the exhaust at the vent hood. You should feel a steady, strong push of air, not a weak puff. If airflow is still restricted after a clean vent, the dryer’s blower assembly may be failing or the motor is wearing out. We’ll tell you that plainly. The vent was our job. The dryer is yours, but you should know the difference.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Styles & brands we work with
Brands We Service for Dryer Vent Cleaning
We service every major dryer manufacturer and vent material type, including rigid metal pipe, semi-rigid aluminum, and the flexible foil transitions that many Round Rock homes still have behind the dryer. The brand of dryer matters less to the vent itself than the condition and routing of the pipe, but we see patterns across manufacturers that are worth knowing. One of the most common calls in this area is for long runs on Whirlpool and Maytag units where the factory transition hose kinks behind the dryer, restricting flow even after the pipe is clean.
We also see a lot of LG and Samsung high-efficiency dryers in two-story Round Rock homes, where the vent run runs 20 feet or more and makes multiple turns. Those systems depend on high static pressure from the dryer’s blower and don’t tolerate a partially clogged pipe. A vent that flows fine on a traditional dryer can be a serious restriction for those units. We answer dryer vent questions all day, and the answer is often less about what’s under the dryer and more about what’s between the dryer and the outside.
Signs You Need Dryer Vent Cleaning Right Now
- Clothes take two or three cycles to dry. If a load that used to dry in 45 minutes now needs 90, the dryer is overworking or the vent is blocked. Hot, damp air can’t escape, so the dryer extends the cycle. That heat and moisture gets trapped inside the drum, and the lint layer in the vent keeps growing. This is the earliest and most reliable warning sign, and people in Round Rock tell us they notice it first with towels and jeans.
- The outside flap doesn’t open when the dryer runs. Go outside during a cycle and check the vent hood. The flap should be pushed open by the exhaust air. If it’s flapping weakly or not at all, airflow is already compromised. Every dry cycle you run in that condition is adding more lint to a pipe that’s not clearing itself.
- The laundry room gets hot and humid while the dryer is on. Heat and moisture should leave through the vent, not leak into the room. When you find condensation on walls or the dryer’s exterior feels unusually hot to the touch, the appliance is radiating heat that the vent can’t remove. That’s a sign of either a blocked pipe or a disconnected run spilling into the wall cavity, which is worse.
- There’s a burning smell when the dryer runs. Lint is the material you’d use to start a campfire, and a dryer produces ignition temperatures under the right conditions. If you smell anything hot or acrid, stop running the dryer and call us at (877) 274-1247. We’ll tell you whether it’s the vent, the dryer itself, or both, and we’ll show you what we found.
- It’s been more than a year since the last cleaning. The NFPA recommends inspection and cleaning at least once annually, and more often with heavy use or long vent runs. If you bought the home and can’t find a record of dryer vent service, assume it hasn’t been done. Homes in Round Rock’s established neighborhoods like Cimarron and Forest Creek change hands with vents that haven’t been touched since installation.
Our Dryer Vent Cleaning Process – Step by Step
We follow the same sequence on every visit, whether the home is a one-story ranch in Round Rock West or a two-story build in Teravista. You’ll know what’s happening each step of the way, and we’ll show you the before-and-after results before we pack up.
- 1
Initial inspection and access. We pull the dryer away from the wall carefully, checking the transition hose for kinks, tears, and disconnections at both ends. In Round Rock homes where the dryer is on a pedestal or tucked into a closet, this step takes longer and requires careful handling to avoid damage to the flooring or the machine. We disconnect the vent and prepare the pipe for the brush.
- 2
Camera survey of the vent run. A small camera goes into the pipe so we can see the full route, identify the type of pipe, and flag any restrictions or separations. If the vent runs through an attic or between floors, the camera tells us what we’re dealing with before the brush goes in. You’re welcome to look at the screen with us. We want you to see what’s inside your walls.
- 3
Rotary brushing of the full vent length. We run a rotating brush head matched to your pipe’s diameter through the entire run, scrubbing the walls and pushing material toward the exterior. The brush is attached to flexible rods that rotate, so it cleans rather than just pushing a single spot. We then vacuum from the exterior hood connection to capture the loosened material.
- 4
Hood and termination point service. The exterior vent hood gets disassembled, cleaned, and checked. We remove lint that has built up around the flap hinge and make sure the flap closes fully when the dryer is off. In Round Rock, the pollen season fills vent hoods with material that can stop the flap from sealing, and that’s a springtime problem a lot of people mistake for a mechanical failure.
- 5
Reconnection, test run, and report. We reconnect the transition hose, push the dryer back against the wall, and run the dryer on a test cycle. We check airflow at the exterior vent and verify that the pipe is clear. You get a before-and-after picture of the inside of your vent line, and if we saw anything that needs attention, we’ll go over it before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Dryer Vent Cleaning Cost in Round Rock?
A standard dryer vent cleaning in Round Rock runs between $110 and $190 for most single-story homes with a short, straight vent run. Two-story homes with longer runs, runs through the attic, or vents that exit from the roof typically run $160 to $250 because the pipe is longer and access to the termination point takes more time and equipment. Multi-turn runs and those with existing blockages may exceed that, and we’ll tell you the exact price before any work begins.
What affects the price is mostly the length and routing of the vent, not the condition of the dryer. A 35-foot run that makes two turns takes longer to brush and requires more vacuum effort than a 12-foot straight shot. If the exterior hood needs replacement, a standard vent hood costs between $30 and $90 including installation. Transition hoses, which are the flexible sections behind the dryer, typically run $25 to $45 if yours has torn or kinked. We’ll give you a firm price before we start, and a free estimate is always available by calling (877) 274-1247. The estimate includes a camera inspection so you can see exactly why we’re recommending what we’re recommending.
Dryer Vent Cleaning Near Round Rock – Our Service Area
We serve Round Rock and the surrounding communities in Williamson and northern Travis counties. That includes Dryer Vent Cleaning in Brushy Creek, Dryer Vent Cleaning in Windemere, Wells Branch, Pflugerville, and Jollyville. We also work regularly in Hutto, Anderson Mill, Cedar Park, Georgetown, Leander, and Serenada. Most standard cleanings are scheduled within 3 to 5 business days, and we do our best to group appointments by neighborhood so we’re already in your area. If you’re in Round Rock proper, you’re typically first on the route.
Serving Round Rock, TX — Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions – Dryer Vent Cleaning in Round Rock
Dryer vent cleaning is the process of removing accumulated lint and debris from the entire exhaust path of your clothes dryer, from the back of the machine to the outside vent hood. It requires a rotating brush sized to your pipe and a vacuum system to capture what the brush loosens. A thorough cleaning includes inspection of the transition hose, the full pipe run, and the exterior hood. We do camera inspections before and after so you can see the work was effective.
Most dryer vent cleanings take between 45 and 90 minutes from start to finish. Simple one-story homes with short straight runs are on the shorter end. Longer runs, roof terminations, or nests inside the vent add time. We’ll give you an arrival window and we stick to it.
The typical cost is $110 to $190 for a standard single-story home, and $160 to $250 for longer or multi-story runs. Your exact price depends on the length, routing, and condition of the vent, not on the brand of dryer you own. Every estimate is free, and we confirm the price before starting the work. Call (877) 274-1247 to schedule.
Yes. We service every major dryer brand, including Whirlpool, LG, Samsung, Maytag, GE, Kenmore, and Electrolux, along with commercial-style units in larger homes. The vent system is brand-independent, but we know how each manufacturer routes exhaust, and that experience helps us diagnose problems faster. Whether you have a standard top load or a high-efficiency front load, we can clean and verify the vent.
We keep several appointment slots each week for urgent calls, and we’ll tell you honestly whether your situation warrants same-day service or whether it can wait for the next open slot. If you smell burning or the dryer isn’t drying at all, unplug the machine and call (877) 274-1247 right away. We’ll do what we can to get someone out quickly while being straight with you about what to expect.
We don’t offer warranties on cleaning because the vent starts re-accumulating lint the day we leave, and how fast depends on how often you use the dryer and what you dry. What we do offer is honest documentation. You’ll get before-and-after camera footage, so you know exactly what condition the vent was in and what we did about it. That’s the record you need for ongoing maintenance.
Clear a path to the dryer and remove anything stacked on top of it. That’s it. We handle moving the dryer, disconnecting the vent, and moving everything back when we’re done. If your dryer is in a tight closet, don’t worry about clearing space in front of the door. We’ll work around the space as it is.
Schedule Your Dryer Vent Cleaning Service in Round Rock Today
If your dryer has been running hot, drying slow, or you simply can’t remember the last time the vent was cleaned, now’s the time to call. We’re taking appointments in Round Rock and nearby communities, including our Dryer Vent Cleaning in Georgetown, and every job starts with a free estimate and a camera inspection. Call (877) 274-1247 to get scheduled. Brent and the crew will take it from there.
Written by Brent Holloway, Owner at Boardwalk Chimney Sweep, serving Round Rock and surrounding communities.