Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Round Rock, TX
Chimney repair in Round Rock most often comes down to two things: rusted chase covers on 1990s-era prefab fireplaces and flashing failures where the chimney meets the roof. We’re Boardwalk Chimney Sweep, and we’ve worked on enough Round Rock homes to know that what starts as a simple sweep call frequently reveals water intrusion or flue damage that’s been quietly worsening for years. Most Round Rock chimneys are factory-built metal systems inside wood-framed chases, not the masonry stacks you see in older Austin neighborhoods. That changes how we inspect, what we look for, and how we repair. Call us at (877) 274-1247 when you’re ready for a straight answer about what’s actually going on up there.
Why Round Rock Homes Are Different
Round Rock’s housing stock is overwhelmingly suburban tract construction from the 1990s through the 2010s: brick veneer over wood frame, slab-on-grade foundations, and factory-built fireplaces with prefab metal chimneys enclosed in wood chase boxes. The original downtown grid has a smaller share of older masonry fireplaces, but the bulk of our service calls come from neighborhoods like Forest Creek, Stone Oak, Turtle Creek Village, and Behrens Ranch, where the chase cover is galvanized steel that rusts through in 10 to 15 years.
This changes the work. A masonry chimney can last a century if maintained. A prefab chimney system has components with defined lifespans: termination caps, chase pans, flashing, refractory panels. Round Rock’s mild Central Texas winters mean fireplaces get light, occasional use, often only during the handful of hard freezes each year. That lets soot and creosote sit for years between sweeps, which masks problems. Meanwhile, hot, humid summers and periodic heavy rain promote rust and water intrusion at the chase top and flashing. By the time a homeowner in Round Rock notices a ceiling stain or a dripping sound in the firebox, the chase cover has usually been compromised for a while. We see this pattern constantly in the high-growth IH-35 corridor, where homes change hands quickly and new owners often discover the chimney has never been swept or inspected since construction.
Styles & brands we work with
Our Main Round Rock Services
Two services account for the majority of Round Rock calls: chimney sweeping and dryer vent cleaning. Both address the leading household combustion hazards under one roof, and bundling them in a single visit saves you a second appointment.
Chimney Sweep in Round Rock
A chimney sweep in Round Rock means working around chase covers, termination caps, and prefab flue components rather than traditional flue tiles. We remove creosote and soot buildup that’s often been accumulating since the home was built, check for animal nests and debris blockages, and document the condition of the flue with a camera inspection. Light seasonal use doesn’t mean the chimney is clean; it means the creosote has had longer to cure and harden. If you’ve never had the chimney swept and you’re not sure when the previous owner last did, start here. Learn more about Chimney Sweep in Round Rock.
Dryer Vent Cleaning in Round Rock
Dryer vent cleaning in Round Rock addresses a hazard that builds up regardless of fireplace use. Lint accumulates in the vent run, especially in single-story homes where the duct travels a longer horizontal path to an exterior wall. Restriction drives up drying times, overheats the dryer, and creates conditions for a lint fire. We clean the full vent run, verify airflow, and check termination flaps and duct connections. Pairing this with a chimney sweep means one call, two fire hazards addressed. Learn more about Dryer Vent Cleaning in Round Rock.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Round Rock
Most chimney repair we perform in Round Rock traces back to the same root cause: water getting where it shouldn’t. The 1990s and 2000s-era factory-built fireplaces common in this area were typically installed with galvanized chase covers that have a defined service life. Once that cover rusts through, water follows the flue down into the firebox and the ceiling below. The hot, humid summers and occasional heavy rain in Central Texas accelerate the corrosion, and because Round Rock is in a high-turnover housing corridor along IH-35, many homeowners discover the damage only after purchase, when the previous owner never addressed it. Our full service cycle means we repair what we inspect: we diagnose the source of the intrusion, replace or restore the failed component, and confirm the fix with the same camera we used to find it. For the full scope of our repair capability, see Chimney Repair.
Chimney Cap Installation
Signs you need it
Rainwater or visible rust stains inside the firebox, birds or squirrels getting into the flue, or a missing cap entirely are the telltale signs.
What it costs in Round Rock
A new chimney cap in Round Rock typically runs from $175 to $450 depending on the flue size and the cap material.
How we do it
We measure the flue opening, select a cap matched to the existing termination, secure it to the flue or chase with mechanical fasteners, and verify the spark arrestor mesh is intact.
Chimney Cap Replacement
Signs you need it
A rusted-through cap, missing spark arrestor mesh, or a cap that has blown off during a storm are clear indications.
What it costs in Round Rock
Chimney cap replacement in Round Rock generally falls between $200 and $500, including removal of the old cap and fitting the new one.
How we do it
We pull the old cap, inspect the flue opening and chase pan beneath it, then install a correctly sized replacement cap with new fasteners and sealant.
Chimney Liner Installation
Signs you need it
Cracked flue tiles, visible rust on a metal liner, or exhaust gases backing up into the home all point to a liner failure.
What it costs in Round Rock
Chimney liner installation in Round Rock typically ranges from $1,200 to $3,500, with notable variation depending on flue height, offset configuration, and liner material.
How we do it
We size the liner to the appliance and flue dimensions, run the new liner down the existing chase, insulate where required, and connect it at the appliance and termination points.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling around the chimney or dampness in the attic after rain indicate flashing has failed or pulled away.
What it costs in Round Rock
Chimney flashing repair in Round Rock usually runs from $250 to $700, depending on the extent of the flashing and whether roof sealant or new metal is required.
How we do it
We inspect the flashing at the roof line, remove failed sealant or rusted metal, and install new flashing or reseal the existing metal to shed water properly.
Chimney Crown Repair
Signs you need it
A cracked or crumbling cement crown that allows water to pool around the flue and work its way into the masonry is the primary sign.
What it costs in Round Rock
Chimney crown repair in Round Rock typically costs between $300 and $900 depending on the crown’s size and whether partial rebuilding is necessary.
How we do it
We clean the damaged crown surface, remove loose cement, apply a properly sloped repair layer or rebuild the crown, and finish with a water-resistant sealant.
What Chimney Repair Costs in Round Rock
| Item | Typical range in Round Rock |
|---|---|
| Chimney cap installation | $175 – $450 |
| Chimney cap replacement | $200 – $500 |
| Chimney flashing repair | $250 – $700 |
| Chimney crown repair | $300 – $900 |
| Chimney liner installation | $1,200 – $3,500 |
Does a rusted chase cover always mean I need a new liner?
No. A rusted chase cover often leaks water down the outside of the flue without necessarily damaging the liner itself. We’ll inspect the liner with a camera before recommending any liner work.
Can HeatShield resurfacing fix my liner without full replacement?
In many Round Rock homes, yes. HeatShield resurfacing can restore a cracked or deteriorated flue liner without a full tear-out and replacement, extending the liner’s service life while keeping cost and disruption lower. Call (877) 274-1247 to see if your chimney qualifies.
Brands We Service in Round Rock
We install and service components from HeatShield, Gelco, and Olympia Chimney. When a replacement part is needed on a Round Rock prefab chimney, we stock the common termination caps and flashing components locally, which keeps simple repairs on a same-week schedule. See our brands for the full material list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Round Rock, TX
| Service | Typical range in Round Rock |
|---|---|
| Chimney sweep | $150 – $300 |
| Dryer vent cleaning | $90 – $180 |
| Chimney cap installation | $175 – $450 |
| Chimney cap replacement | $200 – $500 |
| Chimney flashing repair | $250 – $700 |
| Chimney crown repair | $300 – $900 |
| Chimney liner installation | $1,200 – $3,500 |
What pushes price up in Round Rock is typical of the housing stock: a two-story chase, an offset flue configuration, or a chase cover that needs full replacement rather than a patch. We quote the job before starting, and the price we quote is the price you pay. No hidden add-ons after the fact.
Neighborhoods We Serve in Round Rock
We cover the full Round Rock area: newer subdivisions along the IH-35 corridor, older homes in the original downtown grid, and everything in between. We’re typically able to schedule Round Rock appointments within a few business days, and we group calls by area to keep drive time down.
- Forest Creek
- Stone Oak
- Turtle Creek Village
- Behrens Ranch
- Sonoma
Service Area – Cities Near Round Rock
Boardwalk Chimney Sweep also serves the surrounding communities north and east of Round Rock along the IH-35 and Toll 130 corridors. If you’re in Hutto, TX, Georgetown, TX, Brushy Creek, TX, or Windemere, TX, we can schedule the same full-service chimney and dryer vent work at your home. Call (877) 274-1247 and we’ll confirm the next available appointment window for your area.
Serving Round Rock, TX — Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Round Rock
Most chimney sweeping, cap replacement, and dryer vent cleaning doesn’t require a city permit in Round Rock. Some HOAs, particularly in master-planned communities, restrict visible changes like cap styles or termination covers. We’ll help you match any HOA spec before installation.
We schedule Round Rock work within a few business days for standard service. If you have active water intrusion or a damaged cap, let us know on the call and we’ll do our best to get eyes on the chimney sooner. Emergency scheduling depends on the current week’s route.
We cover the entire city, from the original downtown neighborhoods to the newer subdivisions along University Boulevard and the far north side. If you’re within Round Rock city limits or the immediate surrounding area, we’re happy to come out. Call (877) 274-1247 for a free estimate.
When your chimney or dryer vent needs work, call Boardwalk Chimney Sweep at (877) 274-1247. We’ll give you a straight answer, a clear quote, and work that lasts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Round Rock Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Tara Mercer"Decent work at a reasonable price. Communication in the days before the appointment was a bit thin, but the technician himself was great once he arrived."
— Jessica Lin"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Nicole Hayes