Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Hudson Bend, TX
Chimney repair in Hudson Bend, TX usually means addressing what years of Hill Country wind, sun, and idle fireplaces do to a flue. We see cracked crowns, rusted caps, and liner damage on homes built into the limestone ridges above Lake Travis more often than almost any other issue. Boardwalk Chimney Sweep has served Hudson Bend since 2011, and our repair work starts with one simple rule: we don’t recommend a fix unless we can show you the problem on camera. Call (877) 274-1247 if you suspect a chimney issue or just want a straight answer about what you’re looking at.
Why Hudson Bend Homes Are Different
Hudson Bend sits on wind-exposed ridges and canyon edges above Lake Travis. That geography changes chimney work in ways a suburban sweep never deals with. The limestone terrain means many homes are built on steep, rocky lots where chimney exteriors and caps take brutal sun and wind exposure year-round. Housing here runs mostly from the 1970s through the 2000s, with custom and spec homes featuring prefab metal fireplaces and stone or stucco exteriors. Those prefab units age differently than masonry chimneys, and the metal caps and terminations on them corrode faster in the windy, dry ridge air.
Then there’s the occupancy pattern. A large share of Hudson Bend homes are second residences or short-term rentals occupied only part of the year. That means a chimney tech here routinely services fireplaces the current owner has never actually used. The call is often from a property manager who wants a documented inspection before a guest arrives, not a homeowner who burns wood every weekend. Blowing grit, cedar pollen, and leaves from the ashe-juniper that covers these ridges collect in caps and flues during the months nobody is there. Raccoons and birds find the quiet chimneys inviting. When we open a fireplace in Hudson Bend, we’re as likely to find a sealed-off nest as we are creosote.
Styles & brands we work with
Our Main Hudson Bend Services
Most Hudson Bend homeowners call us for one of two reasons: a chimney that has not been touched in years, or a dryer vent that is quietly building up lint behind the wall. Both are fire hazards, and both are jobs we handle in a single visit if you want them bundled.
Chimney Sweep in Hudson Bend
Chimney sweeping here is about more than running a brush through the flue. On a Hudson Bend ridge home, the cap is usually packed with cedar pollen, grit, and leaf debris, and the firebox may hold nests from the months the house sat empty. We remove the creosote, clear the cap and screen, and document everything with photos so a part-time owner or property manager can see exactly what was found. That camera report matters when you are not standing there watching the work. Chimney Sweep in Hudson Bend
Dryer Vent Cleaning in Hudson Bend
Dryer vents in Hudson Bend homes clog with lint fast because the dry, windy conditions push dust and fine debris into the exterior vent hood, and the long runs in larger custom homes give lint more wall space to accumulate. The National Fire Protection Association identifies dryer lint as a leading cause of household fires, and the fix is straightforward: we pull the built-up lint, clear the termination, and verify airflow. One call, two fire hazards addressed when you bundle it with a chimney sweep. Dryer Vent Cleaning in Hudson Bend
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Hudson Bend
Chimney repair in Hudson Bend is shaped by three things: the 1970s-2000s housing stock with its prefab metal fireplaces, the exposed ridge lines where wind and sun punish caps and crowns, and the fact that many of these fireplaces have sat unused for years while problems developed quietly. A cracked crown lets water into the chimney chase, a rusted cap lets birds in, and a damaged liner can send heat or gases into places they should not go. We repair what we inspect, and in Hudson Bend that often means showing a property owner or manager camera footage of damage they had no way to see from the ground. Our full-service chimney repair work covers everything from the cap to the liner, using the same trade brands chimney professionals specify nationwide. If you’re looking for Chimney Repair, here is what that actually involves on a Hudson Bend home.
Chimney Cap Installation
Signs you need it
You see rust staining on the chimney chase, hear birds or animals inside the flue, or find water in the firebox after rain.
What it costs in Hudson Bend
Chimney cap installation in Hudson Bend typically runs $180 to $650 depending on the cap size and flue configuration of your chimney.
How we do it
We measure the flue opening, select a stainless or copper cap from trade brands like Gelco or Olympia Chimney, mount it with mechanical fasteners rated for exposed ridge wind, and seal the joint against water entry.
Chimney Liner Installation
Signs you need it
Flue tiles are cracked or spalling, you see smoke backing up into the living space, or an inspection shows gaps in the existing liner.
What it costs in Hudson Bend
Chimney liner installation in Hudson Bend starts around $1,800 and can reach $5,200 depending on flue height, the liner material, and whether the existing flue has offsets.
How we do it
We run a camera inspection first, then install a DuraFlex flexible liner system sized to the flue, which lets us navigate the offset configurations common in multistory Hudson Bend homes where rigid pipe cannot reach.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the chimney, damp drywall around the firebox, or visible gaps and lifted metal at the roofline.
What it costs in Hudson Bend
Chimney flashing repair in Hudson Bend generally falls between $350 and $950, with the final number driven by roof pitch and how much of the old flashing must be removed.
How we do it
We remove the failed flashing, cut back the roofing material, install new step and counter flashing, and seal with a high-temp roofing compound that holds up to Hudson Bend’s sun and wind exposure.
Chimney Crown Repair
Signs you need it
The concrete crown on top of the chimney is cracked, spalled, or missing pieces, and you see efflorescence or flaking masonry below the crown line.
What it costs in Hudson Bend
Chimney crown repair in Hudson Bend usually runs $450 to $1,200, though a full crown rebuild on a large masonry chimney can go higher.
How we do it
We grind out the damaged crown surface, apply a proper Wash or polymer-modified crown coat that sheds water away from the flue, and leave an overhang so rain stops running down the chimney face.
What Chimney Repair Costs in Hudson Bend
| Item | Typical range in Hudson Bend |
|---|---|
| Chimney cap installation | $180 – $650 |
| Chimney flashing repair | $350 – $950 |
| Chimney crown repair | $450 – $1,200 |
| Chimney liner installation | $1,800 – $5,200 |
One thing that pushes repair prices up in Hudson Bend is access. Steep lots and elevated rooflines mean we are often working from a lift or staging rather than a ladder against the eaves, and that adds time. The good news is that we give a flat price before we start, so the number on the quote is the number you approve. Nothing gets added on for surprises we find once the work begins.
Do I really need a new liner, or can the old one be saved?
Not every damaged liner needs full replacement. We assess the flue with a camera, and if the damage is surface-level cracking rather than structural failure, HeatShield resurfacing can often restore the liner for less money than a DuraFlex install. You see the footage before you choose.
Can you repair a chimney on a vacation rental before a guest arrives?
Yes, and that is a regular part of our Hudson Bend work. We coordinate with property managers, document everything with photos, and can often complete cap, crown, or flashing repairs in a single visit so the home is ready before check-in. Call (877) 274-1247 to schedule around a booking calendar.
Brands We Service in Hudson Bend
We work with brands specified by chimney industry professionals nationwide, including HeatShield, Gelco, Olympia Chimney, and Famco. When a repair calls for a specific component, we use the manufacturer’s recognized part rather than an off-the-shelf substitute, which keeps warranties valid and inspections clean. Find details on our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Hudson Bend, TX
| Service | Typical range in Hudson Bend |
|---|---|
| Chimney sweep | $180 – $340 |
| Dryer vent cleaning | $130 – $250 |
| Chimney cap installation | $180 – $650 |
| Chimney cap replacement | $220 – $700 |
| Chimney crown repair | $450 – $1,200 |
| Chimney flashing repair | $350 – $950 |
| Chimney liner installation | $1,800 – $5,200 |
| HeatShield resurfacing | $900 – $3,000 |
| Chimney camera inspection | $150 – $350 |
| Fireplace damper replacement | $200 – $600 |
Access drives the biggest price swing in Hudson Bend. A chimney on a steep ridge lot with no flat ground for staging costs more to reach than one on a level driveway, and that is true whether we are doing a $180 cap or a $3,000 liner. Whatever the number, you get it upfront before any work begins.
Neighborhoods We Serve in Hudson Bend
Our crews work throughout the 78645 ZIP and the surrounding lakefront ridges. Response time for most Hudson Bend calls is one to three business days, though we can often move faster when a property manager has a guest arrival deadline. We regularly serve these areas:
- Lakeway and the Lake Travis shoreline communities
- Ridge-top neighborhoods east of Hudson Bend Road
- The custom home tracts along Eck Lane and north of the marina
- Weekend and vacation rental properties across the 78645 corridor
Service Area – Cities Near Hudson Bend
Boardwalk Chimney Sweep serves the broader Hill Country lake corridor from our Round Rock base. If you’re in a neighboring community, you can find local service details for Jonestown, TX, Lago Vista, TX, Briarcliff, TX, or Leander, TX. Same crews, same trade-brand materials, same upfront pricing.
Serving Hudson Bend, TX — Our Local Coverage Area
We’re based in the Hudson Bend area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Hudson Bend
Most Hudson Bend calls are scheduled within one to three business days. If a property manager has a short-term rental booking and needs a documented chimney or vent condition before guest arrival, we do our best to work within that window. Call (877) 274-1247 and tell us the deadline.
Some Hudson Bend communities have architectural review requirements for exterior changes like caps or crowns, but most chimney repairs are considered maintenance and do not require prior approval. If your HOA has a specific rule, we can work with whatever documentation they need before the job.
Yes, and that is one of the most common bundles we do in Hudson Bend, especially for owners who live out of town and want both combustion hazards addressed in one trip. One call, two fire hazards addressed, one service charge for the visit.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hudson Bend Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Yolanda Mendoza"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Travis Norris"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Rosa Castillo