Gelco Chimney Cleaning in Pflugerville, TX

Gelco Chimney Cleaning in Pflugerville, TX | Boardwalk Chimney Sweep

Boardwalk Chimney Sweep provides independent Chimney Sweep – Pflugerville Gelco cleaning and service throughout the area, covering ZIP codes 78660 and 78691. What sets our work apart here isn’t just the sweeping, it’s knowing that most Gelco fireplaces in Pflugerville were installed as builder-grade units in fast-built subdivisions and never properly inspected. We clean, inspect, and repair these systems with OEM-equivalent parts, not brand-badge markups. Call (877) 274-1247 for a free estimate.

Call (877) 274-1247

Why Pflugerville Residents Choose Us for Gelco Service

Gelco factory-built fireplaces show up in a lot of Pflugerville homes, especially the 1990s through 2010s tract builds in neighborhoods like Blackhawk, Falcon Pointe, and Highland Park, and we’ve also handled Gelco repair in Windemere for similar units. We’ve worked on enough of them to know how the firebox panels seat, how the damper frames warp, and how the metal flue liners corrode when they sit uncapped through a Texas summer. Brent Holloway, our owner, came up through the HVAC and building systems program at Austin Community College’s Riverside Campus and spent years working every kind of flue you find in the Hill Country before focusing on chimneys. That background means when we run a camera down a Gelco flue in Pflugerville, we’re not just looking for creosote, we’re looking at the whole combustion system.

We’re an independent company. We aren’t Gelco-authorized, and we don’t pretend to be. What we offer is honest inspection and repair using dampers, caps, and refractory panels matched to the Gelco firebox. If the unit is fine, we’ll tell you it’s fine. If it isn’t, you’ll see the camera footage yourself before anyone recommends work.

See our full range of Gelco sales & service for what applies to your setup.

Common Gelco Chimney Cleaning Problems We Solve in Pflugerville

• Uncapped flues full of wasps, birds, and squirrels. Pflugerville’s mild winters mean chimneys sit idle for months. Wasps build nests in the flue, birds drop twigs down the cap, and squirrels treat the chase top like a condo. This is the single most common reason Pflugerville residents call us, not creosote buildup.
• Cracked or spalled refractory firebox panels. On Gelco prefab units that sat unused for years, then got fired up on a hard-freeze night, thermal cycling stresses the panels. We’ve pulled panels with hairline cracks running the full width of the firebox, cracks the owner never saw because the fireplace had never been lit.
• Rusted or seized dampers on rarely-opened units. A Gelco damper that never gets exercised corrodes shut. The frame warps, the handle binds, and suddenly the fireplace that worked fine last winter won’t open at all. We replace with OEM-equivalent damper assemblies matched to the firebox.
• Loose flue liner joints and worn top-sealing at the cap. Metal flue systems on Gelco prefabs take a beating from Central Texas sun and storm-driven rain. The top-sealing at the cap degrades, water gets in, and the liner joints start to separate. Left alone, that’s how you get rust streaks on the firebox and water staining around the chase.
• Builder-installed fireplaces that were never inspected. Many Gelco units in Pflugerville subdivisions went in when the house was framed and haven’t been looked at since. We routinely find construction debris in the flue, missing caps, and firebox panels with factory defects that should have been caught at install.

Gelco Service in Pflugerville: What Local Conditions Mean for Your Equipment

Pflugerville is one of the fastest-growing suburbs in the Austin metro, and the housing stock reflects that speed. Most of the 1990s through 2010s homes here were built as brick-veneer tract or master-planned builds, and the builder put in a Gelco-style prefab fireplace because the floor plan called for one. The owners, many of them first-time homeowners, never lit it. So when we run a Level 1 inspection on a Gelco unit in the Blackhawk area, we’re not looking for heavy creosote the way we would in a cabin up in the Hill Country where somebody burns pine every winter. We’re looking for bird nests in the flue, cracked refractory panels that thermal-cycled during the February 2021 deep freeze, and damper frames that seized from disuse. The houses went up fast, the fireplaces were an afterthought, and now they’re fifteen years old with zero maintenance history. That’s the Pflugerville pattern we see, along with Gelco repair in Brushy Creek for homes built the same way.rn, and it changes what we look for first. Older small-frame homes near the historic downtown core on the 78660 side are different. Those are more likely to have masonry fireplaces needing repointing, but even there, uncapped flues and pest intrusion are the dominant issues, not creosote thickness.

Gelco Models & Products We Service in Pflugerville

We service the Gelco builder-grade factory-built fireplaces with metal flue liners that are standard in 1990s through 2010s tract builds, the Gelco prefab fireboxes with refractory panel lining common in master-planned subdivision installs, and the Gelco gas fireplaces and gas log set inserts in newer Pflugerville homes, plus Gelco service in Wells Branch for the same product lines. For parts, we use OEM-equivalent or quality aftermarket dampers, caps, and refractory panels matched to the specific Gelco firebox. We don’t push full replacement when a panel swap or damper rebuild will do the job safely. If the firebox panels or flue liner are structurally shot, we’ll tell you plainly and lay out replacement options. We stock common Gelco-compatible caps and damper assemblies for fast turnaround in Pflugerville, so you’re not waiting on a backordered part for a unit that just needs to be safe before the next cold snap.

We cover all of this as part of our broader Pflugerville service area work.

Gelco Service Pricing in Pflugerville

FAQs – Gelco Chimney Cleaning in Pflugerville

Are you authorized by Gelco?
No. We are an independent chimney sweep company with years of hands-on experience on Gelco factory-built fireplaces across the Austin metro. We use OEM-equivalent parts and know these units inside and out, but we’re not affiliated with or authorized by Gelco. What you get from us is an honest inspection and repair recommendation, not a brand badge.

Do you use Gelco OEM parts?
We use OEM-equivalent or quality aftermarket dampers, caps, and refractory panels matched to the specific Gelco firebox. For most Pflugerville homes, this gets the unit safe and functional without the markup or wait time of factory parts. If an OEM part is genuinely the only safe option, we’ll tell you that directly.

How long does Gelco chimney cleaning take in Pflugerville?
A standard sweep and Level 1 inspection on a Gelco prefab usually takes 60 to 90 minutes. If we’re also pulling a bird nest out of the flue or replacing a damper, add time for that. Pflugerville’s pest-intrusion problems are often the longer part of the job, not the sweeping itself. Call (877) 274-1247 and we’ll give you a realistic window for your specific unit.

Which Gelco models do you service?
We service the builder-grade factory-built Gelco fireplaces with metal flue liners common in 1990s through 2010s tract builds, the prefab fireboxes with refractory panel lining in master-planned subdivisions, and the gas fireplaces and gas log inserts in newer Pflugerville homes. If you’re not sure which Gelco unit you have, the Level 1 inspection will identify it.

Do you handle the rush when a hard freeze hits Pflugerville?
Yes. Every year, the first hard freeze after a warm fall sends a wave of calls from Pflugerville homeowners who fire up their fireplace for the first time in a year and immediately notice something wrong. We prioritize freeze-night urgency and work through our Pflugerville schedule to get units inspected or capped before the worst of it. Call (877) 274-1247 early, and we’ll get you on the schedule.

Service Areas Near Pflugerville

Our Gelco service work also reaches Lago Vista, Hornsby Bend, Barton Creek, Lakeway, Bee Cave, and The Hills. If you’re in one of those communities and running a Gelco prefab, the same inspection and repair approach applies. We also have dedicated pages for Gelco service in Jollyville and Gelco service in Hutto.

Book Your Gelco Service in Pflugerville Today

If you’ve got a Gelco fireplace in Pflugerville that hasn’t been inspected, or you heard something in the flue, or you just want a straight answer about whether it’s safe to light, call (877) 274-1247. We’ll get you scheduled, run the inspection, and show you exactly what we find.

Written by Brent Holloway, Owner at Boardwalk Chimney Sweep, serving Pflugerville and the Austin metro.