Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Jollyville, TX
Jollyville doesn’t have the historic brick chimneys you’ll find in older parts of Austin. What it has, mostly, are originally installed prefabricated metal chimneys and fireplaces inside 1980s and 1990s production homes, and they’ve reached the age where their panels crack, their caps corrode, and their original builders are long gone. That’s why most calls we get here start with a repair, not just a sweep. Boardwalk Chimney Sweep has served Jollyville since 2011, and we handle everything from escaped smoke to failed chase covers in the 78729 ZIP. If you need someone who actually understands how these builder-grade systems age, call us at (877) 274-1247.
Why Jollyville Homes Are Different
Most Jollyville houses were built between the 1980s and early 2000s, when this stretch of Travis County went from ranch land to suburban streets. The fireplaces in these homes are almost universally factory-built metal units, not masonry stacks. That changes the nature of chimney work in a specific way: we’re not repointing old brick, we’re evaluating prefab flue systems, chase covers, and termination caps for signs of 20 to 40 years of thermal stress.
Central Texas weather does not help these systems. Long hot summers with the fireplace idle, high humidity, and the occasional hard freeze like the February 2021 storm create a cycle where metal expands and contracts, refractory panels crack behind the facade, and chase covers loosen or rust through at their seams. When a Jollyville home sits empty during stretches of disuse, birds and wasps find their way into uncapped flues. A first visit often finds a cracked panel, a corroded cap, or both.
The housing stock here is also fairly uniform. Stone and veneer facades around open-plan living rooms, with the fireplace as a focal point in the center of the main gathering space. That means when a chimney does leak smoke or water, homeowners notice it quickly. It also means the repair needs to look right, not just function right, because the chase is visible from the couch.
Styles & brands we work with





Our Main Jollyville Services
Most Jollyville homeowners reach for one of two services when something’s wrong with their fireplace or venting. Here’s what each one looks like in this area.
Chimney Sweep in Jollyville
A sweep in Jollyville is not the same job as a sweep in a 1920s bungalow. We’re cleaning prefabricated flues, removing the creosote that builds up after seasons of wood burning, and checking the accessible parts of the system for the panel cracks and cap corrosion that are common in homes built in this area. We also clear out nests and debris from flues that sat unused through long Texas summers. If your fireplace hasn’t been open in a few years, expect wildlife or at least cobwebs. Our full breakdown lives on the dedicated Chimney Sweep in Jollyville page, but the short version: we inspect, sweep, and report what we find with photos so you can see it too.

Dryer Vent Cleaning in Jollyville
Dryer vents are often the more urgent fire risk in a Jollyville home, because the dryer runs every week while the fireplace sits idle for months. Lint builds up inside the vent run, which in many 1980s and 1990s homes here is a long, flexible metal tube running through the wall or up through the attic. Restricted airflow means the dryer works harder and the lint gets hotter. The NFPA identifies dryer vent fires as a major cause of household fires, and the fix is routine access and brushing. We offer this alongside chimney work so both combustion hazards get addressed in one trip. Details are on our Dryer Vent Cleaning in Jollyville page.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Jollyville
Chimney repair in Jollyville usually means fixing what 20 to 40 years of Central Texas heat, humidity, and the occasional hard freeze have done to a builder-installed prefab system. We open up the chase, inspect inside the flue, and find cracked refractory panels, rusted caps, or failed flashing. These weren’t high-end masonry installations when they were new, and time hasn’t made them sturdier. The good news is that most of what we see is repairable without a full rebuild: replacing caps, patching crowns, sealing flashing, or installing a new liner in the original chase. For a deeper look at the full repair scope, see our Chimney Repair overview.
Chimney Cap Installation
Signs you need it
You see birds, wasps, or debris falling into the firebox, or you can see daylight where a cap should be sitting on top of the flue.
What it costs in Jollyville
Chimney cap installation in Jollyville typically runs $150 to $400 depending on cap size and flue diameter.
How we do it
We measure the flue opening, install a properly sized cap, and secure it so it can’t be lifted off by wind or wildlife.
Chimney Cap Replacement
Signs you need it
The old cap is rusted through, dented, missing from the flue, or no longer keeping rain and animals out.
What it costs in Jollyville
Replacing an existing cap in Jollyville runs $150 to $400, which includes removal and disposal of the old cap.
How we do it
We pull the failed cap, match the new one to the flue dimensions, and re-secure it so the chimney terminates safely.
Chimney Liner Installation
Signs you need it
Your chimney inspection shows cracks in the original liner, or the home still has an unlined or dangerously deteriorated flue even though the fireplace is used.
What it costs in Jollyville
Chimney liner installation in Jollyville commonly falls between $1,800 and $4,000 depending on flue height and configuration.
How we do it
We size the new liner to the flue, run it through the existing chase, and connect it so the fireplace drafts properly and the firebox stays sealed.
Chimney Flashing Repair
Signs you need it
You see water stains on the ceiling near the fireplace, or the flashing at the roofline is visibly lifted, corroded, or missing.
What it costs in Jollyville
Flashing repair in Jollyville typically runs $300 to $800, depending on how much of the existing flashing can be saved.
How we do it
We remove the old flashing, inspect the roof penetration, and replace or reseal it so water sheds away from the chase.
Chimney Crown Repair
Signs you need it
The concrete crown at the top of the chimney is cracked, spalling, or letting water into the chase.
What it costs in Jollyville
Crown repair in Jollyville typically runs $400 to $1,000 depending on the extent of the cracking and the size of the crown.
How we do it
We clean and prep the existing crown, fill the cracks with a compatible sealant, and profile it so water runs off rather than pooling.
What Chimney Repair Costs in Jollyville
| Item | Typical range in Jollyville |
|---|---|
| Chimney cap installation | $150 – $400 |
| Chimney cap replacement | $150 – $400 |
| Chimney flashing repair | $300 – $800 |
| Chimney crown repair | $400 – $1,000 |
| Chimney liner installation | $1,800 – $4,000 |
How do I know if my Jollyville chimney needs repair or just a sweep?
A sweep clears what’s built up; a repair fixes what’s broken. If there’s water staining near the firebox, cracked panels visible behind the doors, or rust around the cap, those are repair items. We inspect first and show you photos before recommending anything.
Can Jollyville prefab fireplaces be repaired, or do they need to be replaced?
Most can be repaired. Cracked refractory panels can be replaced, caps and crowns can be rewrapped or resealed, and liner systems can be installed through the existing chase. Full replacement is rare and usually avoidable.
Brands We Service in Jollyville
We work with the brands chimney professionals specify for repair and relining: Copperfield, DuraFlex, HeatShield, and Gelco. Parts are stocked with common sizes for Jollyville’s production-home flue systems, so most repair visits don’t need a second trip. Our brands page covers the lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Jollyville, TX
| Service | Typical range in Jollyville |
|---|---|
| Chimney sweep | $180 – $340 |
| Dryer vent cleaning | $100 – $250 |
| Chimney cap installation | $150 – $400 |
| Chimney cap replacement | $150 – $400 |
| Chimney flashing repair | $300 – $800 |
| Chimney crown repair | $400 – $1,000 |
| Chimney liner installation | $1,800 – $4,000 |
In Jollyville specifically, prices move with access. Steep roof pitches on two-story production homes, tall chase runs, and second-story flue access all push labor up. The equipment itself stays consistent. You get a flat price before we start, so the number on the quote is the number on the invoice.
Neighborhoods We Serve in Jollyville
We work throughout the 78729 ZIP and the surrounding streets that make up Jollyville. Whether your home is in an older section off Pond Springs Road or in one of the newer streets off the main corridor, we’ll get there. Most Jollyville appointments can be scheduled within a week.
- Pond Springs area
- Milwood
- The streets around Jollyville Road
- Oak View Drive area
- Homes along the 183 corridor near Jollyville
Service Area – Cities Near Jollyville
Boardwalk Chimney Sweep is based in Round Rock and covers the communities around Jollyville. If you’re in Anderson Mill, TX, right next door to the west, or Brushy Creek, TX, just up the road, we’re already in your area regularly. We also serve Cedar Park, TX and Wells Branch, TX, covering most of the northwest Austin corridor in a normal week.
Serving Jollyville, TX — Our Local Coverage Area
We’re based in the Jollyville area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Jollyville
We schedule Jollyville appointments typically within a week, and we can sometimes slot a repair visit in sooner if there’s an active leak or exposed flue. Weather, especially summer storms, can shift scheduling, but we’ll always give you a firm date and time.
For the kind of work we do, sweeping, cap replacement, crown repair, or liner installation, a permit is generally not required in unincorporated Travis County. If your HOA has rules about exterior changes, cap color or style is the only thing usually flagged, and we can match whatever the neighborhood standard is.
Yes. If you’re under contract on a Jollyville home with a prefab fireplace, a pre-purchase chimney inspection is a smart move. We check the flue, firebox, cap, and chase, and we give you a written report with photos so you know what you’re buying before closing.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Jollyville Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Nicole Hayes"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Ruben Herrera"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Jennifer Vaughn