Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Cedar Park, TX | Boardwalk Chimney Sweep
We’re an independent DuraFlex service provider cleaning, inspecting, and repairing prefab fireplaces across Cedar Park, TX. The one thing that makes our DuraFlex work here different: a huge share of Cedar Park homes have factory-built DuraFlex fireplaces that have never been cleaned since the builder installed them in the 1990s, 2000s, and 2010s. That first visit isn’t a routine sweep. It’s a diagnostic. Call (877) 274-1247 for a free estimate and we’ll tell you exactly what your system needs.
This page covers how we approach DuraFlex sales & service in Cedar Park specifically, what we see in these tract-built subdivisions, and what it costs to make a neglected system safe again.
Why Cedar Park Residents Choose Us for DuraFlex Service
We’ve worked on DuraFlex in Jollyville and across Cedar Park’s master-planned communities since the first wave of tract homes filled in around the 183 corridor. That matters because a DuraFlex fireplace in a 2003 brick-veneer house off Cypress Creek Road behaves differently from the same model in a 1995 place near the old town center. We know the factory flues, the chase caps builders used, and the gasket quirks that show up after two decades of Texas summers. Brent Holloway, our owner, cut his teeth on HVAC and building systems at Austin Community College’s Riverside Campus, then spent years working every kind of flue you find in the Hill Country. He still remembers when a lot of these lakeside and suburban lots were cedar scrub. When he’s on a Cedar Park roof explaining why a level-two inspection matters, he’s speaking from hands-on experience with these exact systems.
We’re independent. Not authorized by DuraFlex, not partnered, not pushing a brand line. That independence means the only thing we’re diagnosing is your fireplace. We repair what we inspect, and we’ll tell you plainly when a component can wait and when it can’t.
Styles & brands we work with
Common DuraFlex Chimney Cleaning Problems We Solve in Cedar Park
Here’s what we actually find when we open up a DuraFlex system in Cedar Park. Not textbook stuff. What these houses show us.
- Glaze-grade creosote from episodic cold-snap use. Central Texas gives Cedar Park long, hot summers and only a few burn nights each winter. That pattern lets creosote harden on flue walls between burns, especially in DuraFlex fireplaces that have been used lightly for a decade or more. A standard brush often won’t touch glaze-grade buildup. We carry the rotary tools and chemical treatments to break it down without damaging the flue.
- Chase-cap and gasket deterioration from summer UV and storm exposure. Open Texas wind and hail don’t just beat up roofs. They crack builder-installed chase caps and dry out storm collar gaskets on DuraFlex flues all over Cedar Park. Water then runs down the flue and onto the firebox. You won’t see it until the cap comes off.
- Pest intrusion in the factory flue or behind the damper. Wasps, birds, and squirrels love a lightly used DuraFlex system. The original cap screens were often builder-grade from day one, and once they rust or tear, pests move in. We’ve pulled mud-dauber nests, bird nesting material, and squirrel debris from flues in ZIP 78613 and 78630.
- Firebox panel cracks in builder-grade prefab boxes. Thermal cycling over years of occasional use causes hairline cracks in the refractory panels of DuraFlex Sure-Temp fireboxes. Most homeowners never notice until a Level 2 inspection with a camera reveals the damage. This is the kind of thing we specifically look for during cleaning.
- First-time-since-install creosote and debris. A surprising number of Cedar Park DuraFlex fireplaces have never been serviced since the house was built. That means 15 to 25 years of slow accumulation, rusted caps, and original factory components still in place. Cleaning these systems is a different job than maintaining one that’s swept every year.
DuraFlex Service in Cedar Park: What Local Conditions Mean for Your Equipment
Here’s a fact that shapes this work more than almost anything else: Cedar Park’s master-planned subdivisions went up so fast in the 1990s through the 2010s that many DuraFlex prefab fireplaces in places like the Ranch at DuraFlex in Brushy Creek and Buttercup Creek have never had a single cleaning since the builder installed them. So a first-time call in ZIP 78613 is usually a first-ever inspection, not a routine sweep. We’re not just removing soot. We’re checking whether the original factory flue is still intact, whether the chase cap survived two decades of hail and UV, and whether anything’s been living in there. In older neighborhoods near the original town center, where you occasionally find conventional masonry, the work is different. But this city is overwhelmingly prefab. That’s why we treat every first-time DuraFlex cleaning in Cedar Park as a full diagnostic, not a quick brush-through. The mild winters mean these systems get used maybe a dozen times a year, which sounds gentle, but actually creates a specific problem: creosote sits undisturbed for months, hardens, and then the next fire bakes it further. By the time we’re called, a simple sweep may not cut it.
DuraFlex Models & Products We Service in Cedar Park
We service the full range of DuraFlex equipment common in Cedar Park homes, including DuraFlex DirectVent Pro systems, 6-inch and 8-inch factory-built chimney kits, DuraFlex Sure-Temp builder-grade prefab boxes, and DuraFlex flex liner kits used for insert retrofits. For repairs, we stock OEM-equivalent DuraFlex caps, gaskets, and firebox panels, because the factory pieces are the only ones that fit the original chase dimensions. When a DuraFlex part has been discontinued, we source a quality aftermarket match built to the same spec. We don’t use off-the-shelf substitutes from a big-box aisle. We’ll also tell you straight when a component can be repaired versus when the entire prefab box has reached the end of its service life and replacement is the safer call.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Cedar Park
What you’ll pay depends on what we find, but here’s a realistic picture for Cedar Park. A standard DuraFlex cleaning with a Level 1 inspection typically runs $180 to $340. Level 2 inspections, which include a camera run and are often the right call for first-time-since-install systems, add $150 to $250. If we need to replace a chase cap, expect $85 to $250 for the part plus labor. Firebox panel repair generally runs $200 to $600 per panel depending on the DuraFlex model. Full flue relining with a DuraFlex liner kit is a bigger job, typically $1,500 to $3,000 when a prefab system can’t be safely restored. Every free estimate includes a clear breakdown before any work starts, and nothing gets recommended unless we can show you the problem on camera. Call (877) 274-1247 for DuraFlex repair in Anderson Mill or an exact quote on your DuraFlex system.
Serving Cedar Park, TX — Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Cedar Park
Expect a Level 2 inspection with a camera, not just a sweep. A system that’s gone 20 years without service in Cedar Park’s climate almost always has hardened creosote, a deteriorated chase cap, and often pest debris in the flue. We’ll document everything with photos and show you exactly what we find. Cost for the inspection plus cleaning typically runs $300 to $600 depending on condition. Call (877) 274-1247 and we’ll walk you through what’s likely in there before we even book.
Because Cedar Park gets intense UV exposure from May through September plus sudden hail and wind events that hit exposed roof penetrations hard. Builder-grade caps installed when these tract homes went up weren’t designed for two decades of that. We replace them with OEM-equivalent DuraFlex caps or better-spec aftermarket matches that hold up under open Texas exposure. A cap replacement is typically $85 to $250 for the part plus labor.
Usually yes, as long as the cracks are hairline and the firebox structure itself is sound. We replace damaged refractory panels with OEM-equivalent DuraFlex panels, typically $200 to $600 per panel. If the cracks run deep or the firebox has warped from repeated overheating, replacement of the prefab box is the safer call and we’ll tell you that plainly. Call (877) 274-1247 and we’ll assess what’s repairable.
Yes, more often than you’d think. Even regularly used DuraFlex systems in Cedar Park get wasps, birds, and squirrels because the original cap screens rust out or the storm collar gasket fails, leaving gaps. A fireplace that’s dark and warm for a few days a week is still a fine nest site. We inspect the cap, screen, and damper area on every cleaning call, and we stock replacement caps for the DuraFlex models common around here. If you can smell smoke inside, that’s a clue something in the flue is blocking airflow. Call (877) 274-1247 and we’ll take a look.
A Level 1 inspection is visual: we check the accessible parts of the flue, cap, firebox, and damper during a routine cleaning. A Level 2 inspection includes a camera run through the flue and a more detailed look at the chase, cap, and surrounding structure. In Cedar Park, we recommend Level 2 for any DuraFlex system that hasn’t been serviced in years, has shown signs of water intrusion, or is being used after a long idle stretch. The camera doesn’t lie, and it’s how we document what actually needs fixing. Call (877) 274-1247 for a free estimate and we’ll recommend the right level for your system.
Service Areas Near Cedar Park
We serve Cedar Park and the surrounding Hill Country communities. You’ll find us working in Lago Vista, where Brent Holloway has lived long enough to watch the cedar scrub turn into neighborhoods, plus Barton Creek, Lakeway, Bee Cave, and The Hills. We also handle DuraFlex service in Georgetown and DuraFlex service in Leander. If you’re in the broader Cedar Park service area, call us and we’ll let you know when we can be out.
Book Your DuraFlex Service in Cedar Park Today
If your DuraFlex fireplace in Cedar Park hasn’t been looked at in years, or if you’re seeing water stains, smelling smoke inside, or just want a straight answer about what’s going on in that flue, call (877) 274-1247. We’ll schedule a free estimate and give you an honest read on what your system needs. One call covers our Chimney Sweep in Cedar Park, dryer vent cleaning, and the full repair-to-maintenance cycle.
Written by Brent Holloway, Owner at Boardwalk Chimney Sweep, serving Cedar Park and the surrounding Hill Country since the early tract-home wave.