Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Anderson Mill
Dryer vent cleaning in Anderson Mill typically runs $149 – $239 for a standard single-story ranch home, and most jobs are finished in under 90 minutes. Boardwalk Chimney Sweep serves the 78729 zip code with crews who know exactly what these 1970s-era homes look like on the inside – especially where the dryer vent terminates. Call (877) 274-1247 for a free estimate, and we’ll schedule you within the week, not next month.
Here’s what makes our service different in Anderson Mill: we inspect the chimney chase connection, not just the vent line itself. In this subdivision, that matters more than you’d think – and we’ll get to why below.
Key Takeaways:
- Standard dryer vent cleaning in Anderson Mill runs $149 – $239, with cap replacement adding $45 – $85.
- Many 1970s ranch homes here route dryer vents against the exterior chimney chase – a hidden fire risk most vent-only companies miss.
- We’re the full-service chimney and dryer vent specialist, which means one crew can address both combustion hazards in the same visit.
- We carry DuraFlex vent caps in our trucks, so cap replacement happens the same day, not after a parts order.
Why Boardwalk Chimney Sweep Is Anderson Mill’s Preferred Dryer Vent Cleaning Company
We’re not a franchise vent-cleaning outfit that hands a tech a shop vac and a 45-minute window. We’re the company Anderson Mill homeowners call when they want the vent line cleared and the termination point inspected for problems specific to this neighborhood’s construction. Brent Holloway leads our team, and he’s trained every tech to look at a dryer vent the way a chimney sweep does: as a connected system, not an isolated pipe.
Our customers in Anderson Mill regularly tell us two things. First, that we showed up when we said we would. Second, that we found something the last company missed – usually lint packed against the exterior chimney chase where the vent terminates. That second part is the reason we exist. You don’t need a chimney-savvy dryer vent cleaner everywhere, but in Anderson Mill, you do.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Anderson Mill
The full Dryer Vent Cleaning process starts with an inspection of the entire run, from the dryer connection to the termination point outside. Because we’re chimney specialists first, we don’t stop at the vent cap – we check what’s behind it and around it. Here’s what that looks like in an Anderson Mill home.
Dryer Vent Cleaning and Inspection
We clear the entire vent run with professional rotary brushes designed for both rigid metal and semi-rigid foil ductwork common in 1970s and 80s construction. In Anderson Mill, our inspection focuses on two local trouble spots: the interior wall cavity behind the dryer, and the exterior termination point where the vent meets the chimney chase on many original ranch homes. We’ll tell you what we found, show you the debris we removed, and flag anything that needs attention before it becomes a real problem.
Dryer Vent Cap Replacement
The builder-grade flappers installed on Anderson Mill homes in the 70s have a habit of sticking open or breaking off entirely. That lets in humid Central Texas air, insects, and the occasional squirrel looking for a warm nesting spot. We stock DuraFlex vent caps on every truck – the same brand chimney professionals specify for their liner systems – so replacement happens the same day, not after a parts order and a second appointment.
Transition Duct Replacement
The transition duct is the flexible connector between your dryer and the wall. In Anderson Mill homes that still have their original dryer hookups, these ducts are often crushed, kinked, or made from white vinyl that hasn’t been code-compliant in decades. We replace them with rigid or semi-rigid metal transition duct, cut to the correct length for your laundry room’s layout, so air moves the way it should.
Chimney Chase Vent Inspection
This is the service that makes us the right call for Anderson Mill specifically. Many of these 1970s ranch homes have dryer vents that terminate against the exterior chimney chase – the masonry column that surrounds the fireplace flue. Lint accumulates against the warm brick, and that heat, combined with lint’s flammability, creates a fire risk that a standard vent cleaning never sees. We inspect that connection point every time. If we find problems, we have the masonry and liner knowledge to address them in the same visit.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Anderson Mill
We use the same materials chimney industry professionals specify, and we don’t cut corners with off-the-shelf substitutes from a big-box store. For Anderson Mill dryer vent work, that means DuraFlex vent caps on our trucks and Gelco components when a transition or termination replacement calls for it. If your vent line connects to a chimney chase and we discover a liner or mortar issue during inspection, we also carry HeatShield resurfacing materials and Olympia Chimney parts. One crew handles the vent and the chimney, no subcontracting, no second company to coordinate with.
Common Dryer Vent Cleaning Problems We See in Anderson Mill Homes
- Lint packed against the chimney chase. In the 1970s ranch homes that make up much of Anderson Mill, dryer vents often terminate at the exterior masonry chimney chase. Lint settles against the warm brick and builds up over years, and a vent-only cleaning service that never looks behind the termination point will miss it completely.
- Stuck-open builder-grade vent flappers. The original flappers on these homes were cheap plastic, and after 40+ years of Texas sun exposure, most of them either stick open or have broken off. That invites humid air, dust, and nesting birds into your vent line during the long off-season.
- Long vent runs in two-story traditional homes. Some Anderson Mill homes have dryer vents that run 25 feet or more to reach an exterior wall. That exceeds most dryer manufacturers’ recommended maximum, which means lint settles along the run and clogs recur faster than the textbook guidance suggests.
- Crushed transition ducts behind the dryer. If your laundry room still has the original dryer hookup location, chances are the flexible connector behind the dryer has been crushed by years of pushing the machine back against the wall. A crushed transition duct cuts airflow by more than half, regardless of how clean the rest of the vent is.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Anderson Mill, TX
A standard dryer vent cleaning in Anderson Mill runs $149 – $239 for most single-story ranch homes with a straight or mildly offset vent run. Two-story traditional homes with longer runs typically land at $189 – $279, because the job takes more time and often requires working from a ladder at the roof or exterior wall.
Cap replacement adds $45 – $85 depending on the cap style and whether we’re replacing a damaged flapper or the entire termination assembly. Transition duct replacement runs $35 – $75 for the duct and hardware, installed. If we find a chimney chase issue during the vent inspection – loose mortar, cracked crown, or a liner problem – we’ll quote that separately, and nothing gets recommended without camera evidence we show you on-site. Call (877) 274-1247 for a free estimate.
| Service | Anderson Mill Price Range |
|---|---|
| Dryer vent cleaning (single-story ranch) | $149 – $239 |
| Dryer vent cleaning (two-story or long run) | $189 – $279 |
| Vent cap replacement (flapper only) | $45 – $65 |
| Vent cap replacement (full assembly) | $65 – $85 |
| Transition duct replacement | $35 – $75 |
| Chimney chase inspection add-on | Included with every dryer vent cleaning in Anderson Mill |
We Also Serve Cities Near Anderson Mill
Our crews are based in Round Rock, which puts us within easy reach of Anderson Mill and the surrounding communities: Jollyville, Brushy Creek, Cedar Park, and Wells Branch. If you’re in one of those areas and want the same chimney-savvy dryer vent inspection, call us and ask about scheduling a route date. We’ll work you into the schedule without the three-week wait.
Serving Anderson Mill, TX — Our Local Coverage Area
We’re based in the Anderson Mill area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Anderson Mill
Every 12 months if you run the dryer at least once a week, and every 6 months if you have a two-story home with a long vent run or if you notice drying times creeping up. Anderson Mill’s humid summers mean lint absorbs moisture and clumps faster than it would in a drier climate, so the annual interval is a floor, not a ceiling. Call (877) 274-1247 and we’ll help you figure out the right schedule for your specific home.
That smell usually means your dryer vent terminates near or against your chimney chase, and fireplace smoke is being pulled into the vent line through a shared wall cavity or a failed flapper. In Anderson Mill’s original 1970s ranch homes, this is common because the dryer vent and chimney chase were built close together. We inspect that connection point and can seal the gap or reroute the termination if it’s causing cross-contamination.
Indirectly, yes. If your dryer vent terminates against the chimney chase and lint has accumulated there, it can trap moisture against the masonry. Damp mortar and a wet flue reduce draft, and in the worst cases, a lint fire at the chase can damage the chimney structure itself. That’s why our dryer vent cleaning in Anderson Mill always includes a visual check of the chase and the flue termination.
Clothes taking more than one full cycle to dry, a burning or musty smell when the dryer runs, the dryer feeling hot to the touch, or visible lint around the exterior vent cap. In Anderson Mill specifically, also check for a stuck-open flapper – if the little plastic door outside isn’t closing, humid air and pests are getting in, and you should call us before the next freeze. Reach us at (877) 274-1247.
We use rotary brush systems sized for the semi-rigid and rigid metal ductwork common in 1970s ranch construction, along with inspection cameras that let us see the entire vent run, including the interior termination point where Anderson Mill vents meet the chimney chase. Standard vent cleaning pushes a brush through and calls it done. We don’t stop until we’ve seen the whole run.
Written by Brent Holloway, Owner at Boardwalk Chimney Sweep, serving Anderson Mill from our base in Round Rock.
Contact Boardwalk Chimney Sweep for Dryer Vent Cleaning in Anderson Mill
If your dryer’s been taking two cycles to finish a load, or if you’ve never had the vent line inspected in a home you’ve lived in for years, call us. We’ll schedule a free estimate, inspect the full run including the chimney chase connection, and show you exactly what we find before we quote any work. One call addresses the vent and, if needed, the chimney it connects to. Call (877) 274-1247 today.